Isuzu P0138 HO2S12 Circuit High Voltage

Description

OBD-II Trouble Code Description for P0138 Isuzu

O2 Sensor Circuit High Voltage

What does this mean?

OBD2 Code P0138 Isuzu definition:
The Heated Oxygen Sensor (2) located rear of catalytic converter produces an output signal relative to oxygen storage capacity of catalytic converter. Ho2S 2 signal is less active than signal produced by front oxygen sensor. This code sets when HO2 Sensor voltage is greater than 999 mV for more than 2 minutes (time depends on model. Could be as high as 4 minutes)

Symptoms

Possible sumptoms of OBD code P0138 Isuzu
There may be no noticeable symptoms except for MIL illumination. Possible high fuel pressure can over rich the system.

Causes

Possible causes of OBD code P0138 Isuzu
A code P0138 Isuzu may mean that one or more of the following has happened: Faulty O2 sensor Short to battery voltage in O2 sensor signal circuit High fuel pressure (not as likely)

Possible Solutions

Here are some potential solutions: Replace O2 sensor Repair short to battery voltage in o2 sensor signal circuit

The OBD2 Code Information Be Applicable For Isuzu:

2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.