Isuzu P0161 O2 Sensor Heater Circuit Malfunction Bank 2 Sensor 2

Description

OBD-II Trouble Code Description for P0161 Isuzu

O2 Sensor Heater Circuit

What does this mean?

OBD2 Code P0161 Isuzu definition:
It basically means the PCM detected either an excessive current draw, or an open or short in the circuit powering the oxygen sensor’s heater circuit. This is in reference to the Heated Oxygen Sensor (2) located rear of catalytic converter (Bank 2).

Symptoms

Possible sumptoms of OBD code P0161 Isuzu
There will likely be no obvious symptoms other than MIL illumination.

Causes

Possible causes of OBD code P0161 Isuzu
A code P0161 Isuzu may mean that one or more of the following has happened: HO2S heater power circuit open HO2S heater ground circuit open HO2S signal tracking (due to oil or moisture in the connector) HO2S is damaged or has failed PCM has failed

Possible Solutions

Replace HO2 Sensor Repair open or short in power circuit Repair open or short in ground circuit Repair damaged connector due to tracking


The OBD2 Code Information Be Applicable For Isuzu:

2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.