Isuzu P0550 Power Steering Pressure Sensor Circuit Malfunction

Description

OBD-II Trouble Code Description for P0550 Isuzu

Power Steering Pressure Sensor/Switch Circuit

What does this mean?

OBD2 Code P0550 Isuzu definition:
Power steering pressure (PSP) sensor is installed to the power steering high-pressure tube and detects a power steering load. This sensor is a potentiometer which transforms the power steering load into output voltage, and emits the voltage signal to the ECM. The ECM controls the electric throttle control actuator and adjusts the throttle valve opening angle to increase the engine speed and adjusts the idle speed for the increased load.

Symptoms

Possible sumptoms of OBD code P0550 Isuzu
– Engine Light ON (or Service Engine Soon Warning Light) – Power steering inoperative

Causes

Possible causes of OBD code P0550 Isuzu
– Power steering pressure sensor harness or connectors – Power steering pressure sensor harness is open or shorted – Power steering pressure sensor The Error code is generally activated on detection of the following conditions: An excessively low or high voltage from the sensor is sent to ECM.

Possible Solutions


The OBD2 Code Information Be Applicable For Isuzu:

2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.