Description
OBD-II Trouble Code Description for P0641 Isuzu
Sensor Reference Voltage “A” Circuit/Open
What does this mean?
OBD2 Code P0641 Isuzu definition:
The Service Manual says The Engine Control Module (ECM) detects a voltage out of tolerance condition on the 5V reference 1 or 2 bus for more than 0.5 seconds.
Symptoms
Possible sumptoms of OBD code P0641 Isuzu
– Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0641 Isuzu
– ECM Short circuit condition – Shorted sensor on 5 volt circuit – Failed ECM The Error code is generally activated on detection of the following conditions: The ECM has detected the sensor 5 volt reference circuit voltage is higher or lower than expected
Possible Solutions
The OBD2 Code Information Be Applicable For Isuzu:
2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.