Description
OBD-II Trouble Code Description for P0723 Jaguar
Output Speed Sensor Circuit Intermittent
What does this mean?
OBD2 Code P0723 Jaguar definition:
The speed sensor detects the revolution of the idler gear parking pawl lock gear and emits a pulse signal. The pulse signal is sent to the Transmission Control Module (TCM) which converts it into vehicle speed.
Symptoms
Possible sumptoms of OBD code P0723 Jaguar
– Engine Light ON (or Service Engine Soon Warning Light) – Speedometer improper reading – Possible shifting problems
Causes
Possible causes of OBD code P0723 Jaguar
– Speed sensor harness or connectors – Sensor circuit is open or shorted – Speed sensor The Error code is generally activated on detection of the following conditions: The output shaft speed sensor provides an intermittent signal to the TCM upon initial movement of vehicle.
Possible Solutions
The OBD2 Code Information Be Applicable For Jaguar:
2013 Jaguar XJ,2013 Jaguar XF,2013 Jaguar XFR,2012 Jaguar XKR,2012 Jaguar XJ,2012 Jaguar XFR,2012 Jaguar XF,2011 Jaguar XKR,2010 Jaguar XKR,2010 Jaguar XJ,2010 Jaguar XFR,2010 Jaguar XF,2009 Jaguar XF,2008 Jaguar XJ,2007 Jaguar XKR,2007 Jaguar XK,2006 Jaguar XJ,2003 Jaguar RD6 Concept
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Jaguar makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.