Description
OBD-II Trouble Code Description for P0510 Lincoln
Closed Throttle Position Switch
What does this mean?
OBD2 Code P0510 Lincoln definition:
A closed throttle position switch and wide open throttle position switch are built into the Throttle Position Sensor (TPS) unit. The wide open throttle position switch is used only for A/T control. When the throttle valve is in the closed position, the closed throttle position switch sends a voltage signal to the ECM. The ECM only uses this signal to open or close the EVAP canister purge volume control solenoid valve when the throttle position sensor is malfunctioning.
Symptoms
Possible sumptoms of OBD code P0510 Lincoln
– Engine Light ON (or Service Engine Soon Warning Light) – Engine idle problems – Possible hard to start – Possible shifting problems
Causes
Possible causes of OBD code P0510 Lincoln
– The closed throttle position switch Harness or connectors is shorted – Closed throttle position switch – Throttle position sensor The Error code is generally activated on detection of the following conditions: Malfunction is detected when battery voltage from the closed throttle position switch is sent to ECM with the throttle valve opened.
Possible Solutions
Adjusting the Throttle Position Sensor (TPS) takes care of the problem.
The OBD2 Code Information Be Applicable For Lincoln:
2013 Lincoln MKZ,2013 Lincoln MKT,2013 Lincoln MKS,2013 Lincoln MKC,2012 Lincoln MKZ,2011 Lincoln MKX,2010 Lincoln MKZ,2010 Lincoln MKT,2009 Lincoln MKS,2009 Lincoln C Concept,2008 Lincoln MKT Concept,2007 Lincoln Navigator,2007 Lincoln MKZ,2007 Lincoln MKX,2007 Lincoln MKR Concept,2006 Lincoln Zephyr,2006 Lincoln Mark LT,2006 Lincoln MKS Concept,2004 Lincoln Mark X Concept,2004 Lincoln Aviator Concept,2003 Lincoln Town Car,2003 Lincoln Aviator,2001 Lincoln MK9
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Lincoln makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.