OBD-II Trouble Code Description for P0327 Mini

Knock Sensor 1 Circuit Low

What does this mean?

OBD2 Code P0327 Mini definition:
A knock sensor tells the engine computer when one or more of your engine’s cylinders are “knocking”, that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged. The computer uses this information to tune the engine so that it doesn’t knock. If your knock sensor on Bank #1 is generating a low output voltage (perhaps under 0.5V), then it will trigger a P0327 Mini DTC. This P0327 Mini code may show up intermittently or the Service Engine light may be lit constantly. Other knock sensor related DTC codes include P0325 Mini, P0326 Mini, P0328 Mini, P0329 Mini, P0330 Mini, P0331 Mini, P0332 Mini, P0333 Mini, and P0334 Mini.

Symptoms

Possible sumptoms of OBD code P0327 Mini
You may notice drivability problems including fluctation engine RPM, a loss of power, and perhaps some hesitation. There may also be other symptoms.

Causes

Possible causes of OBD code P0327 Mini
Potential causes for a P0327 Mini DTC include (but are not limited to): The knock sensor is faulty and needs to be replaced There is a wiring open/short/fault in the knock sensor circuit The PCM/ECM has failed

Possible Solutions

Verify the resistance of the knock sensor (compare it to factory specs) Inspect for broken/frayed wires leading to the sensor Check the wiring and connections leading to/from the knock sensor and PCM/ECM Verify proper voltage is reaching the knock sensor (e.g. 5 volts) Verify proper grounding of sensor and circuit Replace the knock sensor Replace the PCM/ECM

Related Codes

P0325 Mini P0326 Mini P0328 Mini P0329 Mini P0330 Mini P0331 Mini P0332 Mini P0333 Mini P0334 Mini