Peugeot P0218 Transmission Over Temperature Condition

Description

OBD-II Trouble Code Description for P0218 Peugeot

Transmission Fluid Over Temperature Condition

What does this mean?

OBD2 Code P0218 Peugeot definition:
If you have a P0218 Peugeot code stored, then you have a transmission fluid temperature sender and likely have a transmission over-temp light in the instrument cluster If your transmission/transaxle fluid temperature is greater than 290 deg. F then P0218 Peugeot will set and the overtemp light will illuminate. The number one cause of transmission failure is overheated fluid.

Symptoms

Possible sumptoms of OBD code P0218 Peugeot
Symptoms of a P0218 Peugeot DTC may include: Vehicle transmission/transaxle won’t engage Leaking fluid out of torque converter seal or other location Low fluid in transmission/transaxle

Causes

Possible causes of OBD code P0218 Peugeot
Potential causes of a P0218 Peugeot code include: Overheating due to towing overloaded trailer Transmission cooler or lines restricted Restriction/debris in transmission cooler Low transmission fluid Inoperative cooling fan/fan clutch Missing or damaged front air dam/spoiler Bad transmission fluid temperature sensor

Possible Solutions

If you’re towing a heavy load make sure the vehicle is rated for that load. If the load is too heavy, the transmission cooler may not be able to keep the transmission fluid temperature down. An overheated transmission/transaxle won’t last long. Next, make sure that the cooler isn’t restricted by any debris and that the lines aren’t pinched or leaking. If the transmission cooler is equipped with a cooling fan, make sure it’s operating properly. If the transmission fluid smells burnt or is dark in color, perform a transmission fluid flush. If the transmission fluid level is low, top it off and check for leaks. Note: An overheated transmission can expel fluid out of the vent or out of the torque converter seal.

 


The OBD2 Code Information Be Applicable For Peugeot:

2013 Peugeot 508,2013 Peugeot 4008,2013 Peugeot 308,2013 Peugeot 208,2013 Peugeot 107,2012 Peugeot 308,2012 Peugeot 208,2011 Peugeot 508,2011 Peugeot 408,2011 Peugeot 308,2010 Peugeot 207,2010 Peugeot 207,2009 Peugeot 407,2009 Peugeot 308,2009 Peugeot 206,2009 Peugeot 107,2008 Peugeot 308,2008 Peugeot 207,2007 Peugeot 308,2007 Peugeot 207,2006 Peugeot 407,2006 Peugeot 207,2006 Peugeot 206,2005 Peugeot 407,2005 Peugeot 307,2005 Peugeot 206,2005 Peugeot 107,2005 Peugeot 1007,2004 Peugeot 607,2004 Peugeot 407,2004 Peugeot 206,2003 Peugeot 307,2003 Peugeot 206

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Peugeot makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.