Skoda P0109 Manifold Absolute Pressure/Barometric Pressure Sensor Intermittent

Description

OBD-II Trouble Code Description for P0109 Skoda

Manifold Absolute Pressure/Barometric Pressure Circuit Intermittent

What does this mean?

OBD2 Code P0109 Skoda definition:
The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine’s Engine Control Module (ECM). The data is used to calculate air density and determine the engine’s air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.

Symptoms

Possible sumptoms of OBD code P0109 Skoda
Engine Light ON (or Service Engine Soon Warning Light) Engine rough idle Engine hesitation

Causes

Possible causes of OBD code P0109 Skoda
– Manifold Absolute Pressure harness is open or shorted – Manifold Absolute Pressure sensor poor electrical circuit connector – Faulty Manifold Absolute Pressure sensor – Faulty Powertrain Control Module (PCM) or Engine Control Module (ECM)

Possible Solutions

Replace and Check any of the Causes listed above


The OBD2 Code Information Be Applicable For Skoda:

2013 Skoda Rapid,2013 Skoda Octavia,2013 Skoda Citigo,2011 Skoda Roomster,2011 Skoda Fabia,2010 Skoda Superb,2009 Skoda Superb,2009 Skoda Octavia,2008 Skoda Fabia,2007 Skoda Fabia,2006 Skoda Roomster,2006 Skoda Octavia,2005 Skoda Octavia,2005 Skoda Fabia,2003 Skoda Superb,2003 Skoda Octavia,2003 Skoda Fabia

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Skoda makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.