Description
OBD-II Trouble Code Description for P0534 Suzuki
Air Conditioner Refrigerant Charge Loss
What does this mean?
OBD2 Code P0534 Suzuki definition:
The powertrain control module (ECM) monitors the high side refrigerant pressure via a A/C refrigerant pressure sensor. When the pressure is high the signal voltage is high. When the pressure is low the signal voltage is low. When pressure is high the ECM commands the cooling fans on. When pressure is too high or too low the PCM will not allow the A/C compressor clutch to engage.
Symptoms
Possible sumptoms of OBD code P0534 Suzuki
– Engine Light ON (or Service Engine Soon Warning Light) – A/C Inoperative – A/C Blows Warm
Causes
Possible causes of OBD code P0534 Suzuki
– A/C system low or over charge with refrigerant – Faulty A/C refrigerant pressure sensor – Cooling fans in-operative – A/C refrigerant pressure sensor circuit open or shorted The Error code is generally activated on detection of the following conditions: The ECM has detected that the AC compressor clutch cycle rate is high
Possible Solutions
The OBD2 Code Information Be Applicable For Suzuki:
2012 Suzuki Swift Sport,2012 Suzuki Splash,2012 Suzuki S-Cross Concept,2012 Suzuki G70 Concept,2011 Suzuki Swift S Concept,2011 Suzuki Swift,2011 Suzuki Kizashi,2010 Suzuki SX4,2010 Suzuki Kizashi,2009 Suzuki Grand Vitara,2009 Suzuki Alto,2008 Suzuki Splash,2008 Suzuki SXForce Concept,2008 Suzuki SX4 Sedan,2008 Suzuki Kizashi,2008 Suzuki Equator,2007 Suzuki XL7,2007 Suzuki SX4,2007 Suzuki Kizashi,2005 Suzuki Swift
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Suzuki makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.