Toyota P0508 Idle Air Control Valve Sense Circuit Low

Description

OBD-II Trouble Code Description for P0508 Toyota

Idle Air Control System Circuit Low

What does this mean?

OBD2 Code P0508 Toyota definition:
The ECM controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed. The ECM calculates the actual engine speed from signals of crankshaft position sensor (POS) and camshaft position sensor. The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)

Symptoms

Possible sumptoms of OBD code P0508 Toyota
– Engine Light ON (or Service Engine Soon Warning Light) – Engine hard to start – Rough or erratic idle speed

Causes

Possible causes of OBD code P0508 Toyota
– Dirty throttle body – Electric throttle control actuator misadjusted or damaged – Faulty Electric throttle control actuator – Intake air leak – Poor electrical connection to the Intake Air Control (IAC) valve

Possible Solutions

If there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replaced the Electric Throttle Control Actuator (Motor) to repair the problem.


The OBD2 Code Information Be Applicable For Toyota:

2013 Toyota Auris,2012 Toyota Yaris,2012 Toyota Verso-S,2012 Toyota Tacoma,2012 Toyota Prius V,2012 Toyota Prius C,2012 Toyota Prius,2012 Toyota Hilux,2012 Toyota Camry,2012 Toyota Avensis,2012 Toyota Aurion,2012 Toyota 86 GTS,2011 Toyota Tacoma,2011 Toyota Sienna,2011 Toyota Sequoia,2011 Toyota RAV4,2011 Toyota Matrix,2011 Toyota Highlander,2011 Toyota Corolla,2011 Toyota Avalon,2011 Toyota Auris HSD,2010 Toyota iQ3,2010 Toyota Yaris,2010 Toyota Verso,2010 Toyota Tundra,2010 Toyota Prius,2010 Toyota Land Cruiser,2010 Toyota Corolla,2010 Toyota Camry,2010 Toyota Auris,2010 Toyota 4Runner,2009 Toyota iQ,2009 Toyota Yaris,2009 Toyota Venza,2009 Toyota RAV4,2009 Toyota Matrix,2009 Toyota Hilux,2009 Toyota Aygo,2009 Toyota Avensis,2009 Toyota Aurion,2009 Toyota 4Runner,2008 Toyota Sequoia,2007 Toyota Tundra,2007 Toyota Avensis,2006 Toyota RAV4,2006 Toyota Aurion,2005 Toyota Corolla Sedan,2004 Toyota Prius,2004 Toyota Corolla,2003 Toyota RAV4,2003 Toyota Land Cruiser,2003 Toyota Celica

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Toyota makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.