P0102 CHEVROLET Mass or Volume Air Flow Circuit Low Input

Possible causes
– Faulty mass air flow sensor
– Intake air leaks
– Dirty mass air flow sensor
– Dirty mass air filter
– Mass air flow sensor harness is open or shorted
– Mass air flow sensor circuit poor electrical connection
Tech description
Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.
When is the obd code mean?
This DTC sets when the Powertrain Control Module (PCM) detects that the Mass Air Flow (MAF) sensor frequency is below a predetermined value.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Engine stall
– Engine running rough
– Excessive fuel consumption
– Excessive smoke
P0102 CHEVROLET OBD Code Description

The Mass Air Flow (MAF) sensor measures the amount of air ingested by the engine. The direct measurement of the air entering the engine is more accurate than calculating the airflow from the Manifold Absulte Pressure (MAP), the Intake Air Temperature (IAT), and the engine speed (speed/density). The MAF sensor has a battery feed, a ground, and a signal circuit.

The MAF sensor used on this engine is a hot wire type. This engine uses the MAF sensor in order to measure air flow rate. The MAF output frequency is a function of the power required to keep the air flow sensing elements (hot wires) at a fixed temperature above the ambient temperature. Air flowing through the sensor cools the sensing elements. The amount of cooling is proportional to the amount of air flow. The MAF sensor requires a greater amount of current in order to maintain the hot wires at a constant temperature as the air flow increases. The MAF sensor converts the changes in current draw to a frequency signal read by the Powertrain Control Module (PCM). The PCM calculates the air flow (grams per second) based on this signal.

The PCM monitors the MAF sensor frequency. The PCM determines if the sensor is stuck low, stuck high, not providing the airflow value expected for a given operating condition, or that the signal appears to be stuck based on a lack of signal variation expected during the normal operation. This diagnostic tests for too low an airflow rate.

CHEVROLET Related P0102 code
2001 CHEVROLET SILVERADO Engine And Engine Cooling:engine:other Fuel Types:turbo-charger
2002 CHEVROLET SILVERADO Engine And Engine Cooling:engine:other Fuel Types:turbo-charger
2003 CHEVROLET SILVERADO Engine And Engine Cooling:engine:other Fuel Types:turbo-charger
2004 CHEVROLET SILVERADO Engine And Engine Cooling:engine:other Fuel Types:turbo-charger
1996 CHEVROLET CAPRICE Engine And Engine Cooling:exhaust System
1996 CHEVROLET IMPALA Engine And Engine Cooling:exhaust System
2005 CHEVROLET COBALT Engine And Engine Cooling:engine