Description
OBD-II Trouble Code Description for P0341 Buick
Camshaft Position Sensor “A” Circuit Range/Performance
What does this mean?
OBD2 Code P0341 Buick definition:
This P0341 Buick code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal. The camshaft position sensor (CPS) sends a specific signal to the PCM for Top Dead Center on the compression stroke as well as signals indicating the position of the cam sensor. This is accomplished through a reluctor wheel attached to the camshaft that passes by the cam sensor. Any time that the signal to the PCM is inconsistent with what the signal should be, this code is set. NOTE: this code can also be set by extended cranking periods.
Symptoms
Possible sumptoms of OBD code P0341 Buick
The car will likely run with this code set, as it is often intermittent and also because the PCM can often operate the vehicle in “limp-in/limp-home” mode even with a cam sensor signal problem. There may be no noticeable symptoms other than: Poor fuel economy (if engine runs) Possible no start condition
Causes
Possible causes of OBD code P0341 Buick
A code P0341 Buick may mean that one or more of the following has happened: Cam sensor wiring routed too close to spark plug wiring (causing interference) Poor wiring connection at cam sensor Poor wiring connection at PCM Bad cam sensor Damaged reluctor wheel
Possible Solutions
Often relacing the sensor fixes this code, but not necessarily. Therefore it’s important to check the following: Check that the wiring isn’t routed too close to any secondary ignition components (coil, spark plug wires, etc.) Visually inspect the wiring at the sensor for any burn marks, discoloration indicative of melting or chafing Visually inspect the cam sensor for damage Visually inspect the reluctor wheel through the cam sensor port (if possible) for any missing teeth or any damage If reluctor isn’t visible from outside the engine, visual test can only be done by removing cam shaft or intake manifold (depending on engine design) If all checks out okay, then replace the sensor. Related Camshaft Trouble Codes: P0340 Buick
The OBD2 Code Information Be Applicable For Buick
2013 Buick Verano Turbo,2013 Buick Riviera Concept,2013 Buick Encore,2013 Buick Enclave,2012 Buick Verano,2012 Buick Regal GS,2011 Buick Regal,2011 Buick LaCrosse GL Concept,2011 Buick GL8,2011 Buick Envision Concept,2010 Buick Regal GS Concept,2010 Buick LaCrosse,2009 Buick Business Concept,2008 Buick Lucerne Super,2008 Buick LaCrosse Super,2008 Buick LaCrosse CXS,2008 Buick Invicta Concept,2008 Buick Enclave,2007 Buick Riviera Concept Coupe,2006 Buick Terraza,2006 Buick Rendezvous CXL,2006 Buick Rainier CXL,2006 Buick Lucerne CXS,2006 Buick Enclave Concept,2005 Buick Terraza CXL,2005 Buick Royaum,2005 Buick Rendezvous CX,2005 Buick Park Avenue,2005 Buick LeSabre Celebration Edition,2005 Buick LaCrosse CXS,2005 Buick LaCrosse CSX,2005 Buick Century,2004 Buick Velite Concept,2004 Buick Rendezvous Ultra,2004 Buick Regal Abboud GS,2004 Buick Rainier,2004 Buick Park Avenue Ultra,2003 Buick Rendezvous,2003 Buick Park Avenue Ultra,2002 Buick Rendezvous,2002 Buick Regal,2002 Buick LeSabre Custom,2001 Buick Regal,2001 Buick Park Avenue Ultra,2001 Buick Park Avenue,2001 Buick LeSabre,2001 Buick Blackhawk Concept,2001 Buick 2-2 Bengal Roadster Concept,2000 Buick Regal GNX Show Car,2000 Buick Regal Cielo Concept,2000 Buick Regal,2000 Buick Park Avenue,2000 Buick LeSabre Limited,2000 Buick Century
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Buick makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.