Description
OBD-II Trouble Code Description for P0113 Buick
Intake Air Temperature Sensor 1 Circuit High
What does this mean?
OBD2 Code P0113 Buick definition:
The powertrain control module (PCM) monitors the temperature of the air entering the engine. The PCM supplies a 5 volt reference voltage to the Intake Air Temperature (IAT) sensor. The IAT is a thermistor that varies resistance based on temperature. As the temperature increases, resistance decreases. Low temperature results in a high signal voltage. When the PCM sees a signal voltage higher than 5 volts, it sets this P0113 Buick check engine light code.
Symptoms
Possible sumptoms of OBD code P0113 Buick
There will likely be no symptoms other than illumination of the Malfunction Indicator Lamp (MIL – Check Engine Light / Service Engine Soon).
Causes
Possible causes of OBD code P0113 Buick
?Internally failed IAT sensor ? Faulty connection at IAT sensor ? Open in IAT ground circuit or signal circuit ? Short to voltage in IAT signal circuit or reference circuit ?IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plug cables, etc.) ? Faulty PCM (less likely but not impossible)
Possible Solutions
First, if you have access to a scan tool, is there an IAT reading? If the IAT reading is logical then the problem is likely intermittent. If the reading is less than -30 degrees, unplug the connector. Install a jumper wire between the harness connector signal and ground circuits. The IAT temperature reading on the scan tool should be maxed out at the high end. For example it should be 280 degrees Farenheit or higher. If it is, the wiring is okay, and it may have been the connection. If it isn’t install the jumper wire between the IAT signal circuit and the chassis ground. If now the IAT reading on the scan tool is maxed out then check for an open in the IAT ground circuit. If you get no reading at all on the scan tool, it’s likely that the sensor signal is open or the 5 volt reference is missing. Check using a DVOM (digital volt ohm meter) for a 5 volt reference. If it’s there, then unplug the connector at the PCM and check for continuity on the IAT signal circuit between the PCM connector and the IAT connector.
The OBD2 Code Information Be Applicable For Buick
2013 Buick Verano Turbo,2013 Buick Riviera Concept,2013 Buick Encore,2013 Buick Enclave,2012 Buick Verano,2012 Buick Regal GS,2011 Buick Regal,2011 Buick LaCrosse GL Concept,2011 Buick GL8,2011 Buick Envision Concept,2010 Buick Regal GS Concept,2010 Buick LaCrosse,2009 Buick Business Concept,2008 Buick Lucerne Super,2008 Buick LaCrosse Super,2008 Buick LaCrosse CXS,2008 Buick Invicta Concept,2008 Buick Enclave,2007 Buick Riviera Concept Coupe,2006 Buick Terraza,2006 Buick Rendezvous CXL,2006 Buick Rainier CXL,2006 Buick Lucerne CXS,2006 Buick Enclave Concept,2005 Buick Terraza CXL,2005 Buick Royaum,2005 Buick Rendezvous CX,2005 Buick Park Avenue,2005 Buick LeSabre Celebration Edition,2005 Buick LaCrosse CXS,2005 Buick LaCrosse CSX,2005 Buick Century,2004 Buick Velite Concept,2004 Buick Rendezvous Ultra,2004 Buick Regal Abboud GS,2004 Buick Rainier,2004 Buick Park Avenue Ultra,2003 Buick Rendezvous,2003 Buick Park Avenue Ultra,2002 Buick Rendezvous,2002 Buick Regal,2002 Buick LeSabre Custom,2001 Buick Regal,2001 Buick Park Avenue Ultra,2001 Buick Park Avenue,2001 Buick LeSabre,2001 Buick Blackhawk Concept,2001 Buick 2-2 Bengal Roadster Concept,2000 Buick Regal GNX Show Car,2000 Buick Regal Cielo Concept,2000 Buick Regal,2000 Buick Park Avenue,2000 Buick LeSabre Limited,2000 Buick Century
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Buick makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.