Dodge P0226 Throttle Pedal Position Sensor/Switch C Circuit

Description

OBD-II Trouble Code Description for P0226 Dodge

Throttle/Pedal Position Sensor/Switch “C” Circuit Range/Performance

What does this mean?

OBD2 Code P0226 Dodge definition:
Electric Throttle Control Actuator consists of throttle control motor, throttle position (TP)sensor, etc. The throttle position sensor responds to the throttle valve movement. The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

Symptoms

Possible sumptoms of OBD code P0226 Dodge
– Engine Light ON (or Service Engine Soon Warning Light) – No throttle response

Causes

Possible causes of OBD code P0226 Dodge
– Harness or connector (The TP sensor circuit is open or shorted.) – Electric Throttle Control Actuator (or Throttle Body Motor) – Accelerator Pedal Position Sensor (APP) The Error code is generally activated on detection of the following conditions: An out of range voltage from the Accelerator Pedal Position Sensor (APP) sensor 1 is sent to ECM.

Possible Solutions