Description
OBD-II Trouble Code Description for P0232 Fiat
Fuel Pump Secondary Circuit High
What does this mean?
OBD2 Code P0232 Fiat definition:
The fuel pump is powered by the fuel pump relay. When the PCM (powertrain control module) activates the fuel pump relay, voltage is supplied to the fuel pump and it pressurizes the fuel system. Some vehicles have a feedback on the fuel pump supply circuit. This is simply a circuit spliced into the voltage feed to the fuel pump. The splice is usually located close to the PCM. The PCM monitors this feedback circuit to ensure that there is proper voltage being sent to the fuel pump. As it activates the fuel pump relay, it expects to see battery voltage on the feedback circuit. If the PCM sees an unexpected high voltage when the fuel pump isn’t activated, P0232 Fiat may set.
Symptoms
Possible sumptoms of OBD code P0232 Fiat
Symptoms of a P0232 Fiat DTC may include: MIL (malfunction indicator lamp) illumination Fuel pump runs with key off Small amount of voltage present on FP (fuel pump) voltage supply circuit due to short
Causes
Possible causes of OBD code P0232 Fiat
Potential causes of a P0232 Fiat code include: Bad FP relay Short to voltage on FP voltage supply circuit or feedback circuit Short to ground on PCM FP relay control circuit PCM FP relay control driver shorted to ground internally
Possible Solutions
It is possible with a P0232 Fiat for the fuel pump to be running continuously, even with the ignition off. If that’s the case and you can hear the fuel pump running, you may be able to disregard some of the following checks. Turn the KOEO (key on engine off) and wait for a few seconds. This allows the PCM to complete it’s fuel pump pre-cycle. Now, using your scan tool (if you have one) observe the FP VOLTAGE FEEDBACK reading in the datastream. This reading indicates what kind of voltage the fuel pump is receiving. If you don’t have access to a scan tool, use a voltmeter to read the FP voltage at the fuel tank. If your reading shows any voltage at all present to the fuel pump with KOEO (or if you can hear the pump running), remove the FP relay. If the voltage remains, or the fuel pump continues to run, then there is a short to voltage on the FP voltage supply circuit or on the feedback circuit. Repair as necessary. If the voltage disappears (or the pump quits running) with the FP relay removed then try replacing the relay with a spare one. Upon reinstalling the spare relay, if the voltage disappears, the relay was faulty due to a short. If, though, after replacing the relay voltage is still present, suspect that the PCM FP relay control circuit is shorted to ground. Check for a short to ground on the PCM FP relay control (ground driver) circuit by removing the FP relay and ohm between a good ground and the PCM FP relay control. There should be no continuity to ground with KOEO (after the FP pre-cycle is completed). If there is continuity to ground the wire is shorted. Find the short to ground and repair as necessary. If you can find no physical short, It may be necessary to snip the FP relay control wire close to the PCM connector where it will be easy to repair and check for continuity to ground with KOEO coming OUT of the PCM. If there is no continuity the wire is shorted in the harness. But if continuity exists, the driver may be internally shorted to ground and the PCM may require replacement.
The OBD2 Code Information Be Applicable For Fiat:
2013 Fiat Viaggio,2013 Fiat Strada,2013 Fiat Panda UK Version,2013 Fiat Panda Trekking,2013 Fiat Panda 4×4,2013 Fiat Panda,2013 Fiat 500S,2013 Fiat 500L,2013 Fiat 500C Abarth,2012 Fiat Punto,2012 Fiat Palio,2012 Fiat Freemont AWD,2012 Fiat Freemont,2012 Fiat 695 Abarth Maserati Edition,2012 Fiat 500 Abarth,2011 Fiat Uno,2011 Fiat Punto Evo Abarth esseesse,2011 Fiat Punto Evo Abarth,2011 Fiat Idea,2011 Fiat Bravo,2011 Fiat 500 Sport,2011 Fiat 500 Coupe Zagato Concept,2011 Fiat 500C Abarth esseesse,2011 Fiat 500C Abarth,2010 Fiat Uno Cabrio Concept,2010 Fiat Sedici,2010 Fiat Punto Evo,2010 Fiat Doblo Cargo,2010 Fiat Doblo,2010 Fiat 500 Abarth R3T,2010 Fiat 500C,2009 Fiat Grande Punto Natural Power,2009 Fiat Fiorino Qubo,2009 Fiat 695 Abarth Tributo Ferrari,2009 Fiat 500 Barbie Concept,2009 Fiat 500 Abarth esseesse,2009 Fiat 500 Abarth Assetto Corse,2009 Fiat 500 Abarth,2008 Fiat Portofino Concept,2008 Fiat Panda Cross,2008 Fiat Grande Punto Abarth,2008 Fiat Grande Punto,2008 Fiat Fiorino,2008 Fiat Croma,2008 Fiat Bravo 1.6 Multijet 16v,2008 Fiat 500,2007 Fiat Panda 100HP,2007 Fiat Linea,2007 Fiat Grande Punto Abarth S2000,2007 Fiat Grande Punto Abarth Preview,2007 Fiat Bravo,2006 Fiat Ulysse,2006 Fiat Sedici,2006 Fiat Panda Multi Eco Concept,2006 Fiat Panda Cross,2005 Fiat Panda Alessi,2005 Fiat Panda 4×4 1.3 Multijet,2005 Fiat Oltre Concept,2005 Fiat Idea,2005 Fiat Grande Punto,2005 Fiat Doblo Cargo,2005 Fiat Doblo,2005 Fiat Croma,2005 Fiat 600 50th,2004 Fiat Trepiuno Concept,2004 Fiat Strada Malibu,2004 Fiat Stilo M.Y. 1.9 Multijet 5door,2004 Fiat Seicento,2004 Fiat Punto Rally,2004 Fiat Panda 4×4,2004 Fiat Multipla,2004 Fiat Idea 5terre Concept,2003 Fiat Strada,2003 Fiat Punto Sporting,2003 Fiat Punto Rally,2003 Fiat Punto Natural Power,2003 Fiat Punto Dynamic,2003 Fiat Punto Active,2003 Fiat Panda Emotion,2003 Fiat Panda Dynamic,2003 Fiat Panda Actual,2003 Fiat Panda,2003 Fiat Marrakech Concept,2003 Fiat Idea 1.9 Multijet Dynamic,2003 Fiat Idea 1.4 16v Emotion,2003 Fiat Idea,2003 Fiat Barchetta First Class of Alviero Martini,2003 Fiat Barchetta,2002 Fiat Ulysse Emotion 2.0 16v,2002 Fiat Ulysse 2.0 JTD,2002 Fiat Ulysse,2002 Fiat Stilo Multi Wagon Dynamic,2002 Fiat Stilo Multi Wagon Actual,2002 Fiat Stilo Multi Wagon,2002 Fiat Stilo Dynamic,2002 Fiat Stilo Active,2002 Fiat Stilo Abarth,2002 Fiat Stilo,2002 Fiat Simba Concept,2002 Fiat Palio Weekend,2002 Fiat Palio,2002 Fiat Multipla,2002 Fiat Albea,2001 Fiat Doblo
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Fiat makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.