Hummer P0109 Manifold Absolute Pressure/Barometric Pressure Sensor Intermittent

Description

OBD-II Trouble Code Description for P0109 Hummer

Manifold Absolute Pressure/Barometric Pressure Circuit Intermittent

What does this mean?

OBD2 Code P0109 Hummer definition:
The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine’s Engine Control Module (ECM). The data is used to calculate air density and determine the engine’s air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.

Symptoms

Possible sumptoms of OBD code P0109 Hummer
Engine Light ON (or Service Engine Soon Warning Light) Engine rough idle Engine hesitation

Causes

Possible causes of OBD code P0109 Hummer
– Manifold Absolute Pressure harness is open or shorted – Manifold Absolute Pressure sensor poor electrical circuit connector – Faulty Manifold Absolute Pressure sensor – Faulty Powertrain Control Module (PCM) or Engine Control Module (ECM)

Possible Solutions

Replace and Check any of the Causes listed above

The OBD2 Code Information Be Applicable For Hummer:

2009 Hummer H3T Alpha,2008 Hummer HX Concept,2008 Hummer H3 Wagon Concept,2008 Hummer H3 Alpha,2008 Hummer H2,2007 Hummer H3 Open Top,2007 Hummer H3X,2007 Hummer H3R Off Road Concept,2007 Hummer H2 Safari Concept,2006 Hummer H3,2006 Hummer H2 SUT Limited Edition,2006 Hummer H1 Alpha,2005 Hummer H3 Street,2005 Hummer H2 SUT,2004 Hummer H2 SUT Concept,2004 Hummer H2H Hydrogen Concept,2004 Hummer H2,2004 Hummer H1,2003 Hummer Humvee Military Vehicle,2003 Hummer H3T Concept,2003 Hummer H2 with GM Accessories,2003 Hummer H2 SUV,2003 Hummer H2 SUT Dirt Sport Concept,2003 Hummer H1,2003 Hummer Bike,2002 Hummer H2 SUV Concept,2002 Hummer H1 10th Anniversary Edition,2002 Hummer H1,2001 Hummer H1 Alpha Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Acura makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.