Description
OBD-II Trouble Code Description for P0125 Isuzu
Insufficient Coolant Temperature for Closed Loop Fuel Control
What does this mean?
OBD2 Code P0125 Isuzu definition:
This means that the engine coolant temperature (ECT) sensor indicates that the engine has not reached the required temperature level to enter closed-loop operation within a specified amount of time after starting the engine.
Symptoms
Possible sumptoms of OBD code P0125 Isuzu
You will likely not notice any drivability problems
Causes
Possible causes of OBD code P0125 Isuzu
A code P0125 Isuzu may mean that one or more of the following has happened: Insufficient warm up time Low engine coolant level Leaking or stuck open thermostat Faulty coolant temperature sensor
Possible Solutions
The simplest thing to do is to reset the code and see if it comes back. If the code comes back, the problem is likely going to be the result of the above causes (faulty thermostat, faulty ECT sensor, or a low coolant level
The OBD2 Code Information Be Applicable For Isuzu:
2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.