Isuzu P0132 HO2S11 Sensor Circuit High Voltage

Description

OBD-II Trouble Code Description for P0132 Isuzu

O2 Sensor Circuit High Voltage

What does this mean?

OBD2 Code P0132 Isuzu definition:
This involves the front oxygen sensor on Bank 1. This code indicates that the heated oxygen sensor reading is too high. In the case of Ford vehicles, that indicates the voltage at the sensor is over 1.5 volts. Other vehicles may be similar.

Symptoms

Possible sumptoms of OBD code P0132 Isuzu
You will likely not notice any drivability problems.

Causes

Possible causes of OBD code P0132 Isuzu
A code P0132 Isuzu may mean that one or more of the following has happened: The oxygen sensor heater circuit is shorted out The wiring to the sensor is broken / frayed (less likely)

Possible Solutions

The simplest thing to do is to reset the code and see if it comes back. If the code comes back, the problem is more than likely the front Bank 1 oxygen sensor. You will likely wind up replacing it but you should also consider these possible solutions: Check for wiring problems (shorted, frayed wires) Check the voltage of the oxygen sensor


The OBD2 Code Information Be Applicable For Isuzu:

2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.