Description
OBD-II Trouble Code Description for P0290 Isuzu
Cylinder 10 Contribution/Balance
What does this mean?
OBD2 Code P0290 Isuzu definition:
Code P0290 Isuzu is triggered when the Power Train Control Module (PCM) detects that the acceleration rate of the crankshaft for Cylinder #10 was less than a calibrated amount. During normal conditions the PCM turns the Fuel Injectors ON and OFF in the Fuel Injection System.
Symptoms
Possible sumptoms of OBD code P0290 Isuzu
– Engine Light ON (or Service Engine Soon Warning Light) – Engine Misfire – Engine Run Rough – Low MPG
Causes
Possible causes of OBD code P0290 Isuzu
– Fuel Injector #10 – Faulty or Corroded Fuel Injector #10 Connector – Plugged #10 Fuel Injector – Dirty #10 Fuel Injector
Possible Solutions
– Clean Fuel Injector #10 Connector – Clean Fuel Injector #10 – Replaced Fuel Injector
The OBD2 Code Information Be Applicable For Isuzu:
2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.