Isuzu P0446 Evaporative Emission Vent System Performance

Description

OBD-II Trouble Code Description for P0446 Isuzu

Evaporative Emission System Vent Control Circuit

What does this mean?

OBD2 Code P0446 Isuzu definition:
Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM’s driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 Isuzu will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test.

Symptoms

Possible sumptoms of OBD code P0446 Isuzu
There will be no obvious symptoms to driver, other than MIL illumination.

Causes

Possible causes of OBD code P0446 Isuzu
A code P0446 Isuzu could mean one or more of the following has happened: Faulty vent valve Open, short or excessive resistance on Vent valve control circuit Blockage of vent valve Bad PCM

Possible Solutions

With a P0446 Isuzu OBD-II trouble code, here are some things to try: Replace Vent valve Repair open, short, or resistance problem in control circuit Repair open, or short, or resistance problem in power circuit Replace PCM

Related Codes

P0440 Isuzu P0441 Isuzu P0442 Isuzu P0443 Isuzu P0453 Isuzu P0455 Isuzu P0456 Isuzu


The OBD2 Code Information Be Applicable For Isuzu:

2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.