Description
OBD-II Trouble Code Description for P0522 Isuzu
Engine Oil Pressure Sensor/Switch Low Voltage
What does this mean?
OBD2 Code P0522 Isuzu definition:
The PCM continuously monitors the engine oil pressure. The Oil Pressure Sensor/Switch sends a signal to the PCM when the engine is running.
Symptoms
Possible sumptoms of OBD code P0522 Isuzu
– Engine Light ON (or Service Engine Soon Warning Light) – Oil pressure warning light ON.
Causes
Possible causes of OBD code P0522 Isuzu
– Low oil level or motor mechanical fault – Open or short oil level sensor circuit condition – Poor oil level sensor electrical connection – Faulty oil pressure sensor The Error code is generally activated on detection of the following conditions: The P0522 Isuzu is detected when the signal sent from oil pressure sensor to PCM goes below specifications.
Possible Solutions
The most likely cause is a faulty oil pressure sensor/switch
The OBD2 Code Information Be Applicable For Isuzu:
2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.