Isuzu P0751 Shift Solenoid A Performance or Stuck Off

Description

OBD-II Trouble Code Description for P0751 Isuzu

Shift Solenoid “A” Performance or Stuck Off

What does this mean?

OBD2 Code P0751 Isuzu definition:
Shift solenoid valve A is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

Symptoms

Possible sumptoms of OBD code P0751 Isuzu
– Engine Light ON (or Service Engine Soon Warning Light) – Transmission will not shift gears.

Causes

Possible causes of OBD code P0751 Isuzu
– Low transmission fluid level – Dirty transmission fluid – Faulty shift solenoid A valve – Shift solenoid A valve harness or connectors – Shift solenoid A valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0751 Isuzu code is detected when the gear required by the ECM does not match the actual gear when vehicle is driven.

Possible Solutions

The OBD2 Code Information Be Applicable For Isuzu:

2011 Isuzu Rodeo 3.0 Denver,2008 Isuzu Pickup,2007 Isuzu Ascender,2002 Isuzu Axiom XST Concept,2002 Isuzu Axiom XSR Concept,2001 Isuzu Zen Concept,2001 Isuzu GBX Concept,2001 Isuzu Axiom XSF Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Isuzu makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.