Jaguar P0109 Manifold Absolute Pressure/Barometric Pressure Sensor Intermittent

Description

OBD-II Trouble Code Description for P0109 Jaguar

Manifold Absolute Pressure/Barometric Pressure Circuit Intermittent

What does this mean?

OBD2 Code P0109 Jaguar definition:
The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine’s Engine Control Module (ECM). The data is used to calculate air density and determine the engine’s air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.

Symptoms

Possible sumptoms of OBD code P0109 Jaguar
Engine Light ON (or Service Engine Soon Warning Light) Engine rough idle Engine hesitation

Causes

Possible causes of OBD code P0109 Jaguar
– Manifold Absolute Pressure harness is open or shorted – Manifold Absolute Pressure sensor poor electrical circuit connector – Faulty Manifold Absolute Pressure sensor – Faulty Powertrain Control Module (PCM) or Engine Control Module (ECM)

Possible Solutions

Replace and Check any of the Causes listed above


The OBD2 Code Information Be Applicable For Jaguar:

2013 Jaguar XJ,2013 Jaguar XF,2013 Jaguar XFR,2012 Jaguar XKR,2012 Jaguar XJ,2012 Jaguar XFR,2012 Jaguar XF,2011 Jaguar XKR,2010 Jaguar XKR,2010 Jaguar XJ,2010 Jaguar XFR,2010 Jaguar XF,2009 Jaguar XF,2008 Jaguar XJ,2007 Jaguar XKR,2007 Jaguar XK,2006 Jaguar XJ,2003 Jaguar RD6 Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Jaguar makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.