Jaguar P0245 Turbo/Super Charger Wastegate Solenoid A Low

Description

OBD-II Trouble Code Description for P0245 Jaguar

Turbo/Super Charger Wastegate Solenoid “A” Low

What does this mean?

OBD2 Code P0245 Jaguar definition:
The PCM monitors the supercharger (boost) bypass (SCB) solenoid circuit for an electrical failure. The test fails when the signal moves outside the minimum or maximum allowable calibrated parameters for a specified SCB solenoid duty cycle (100% or 0%) by PCM command.

Symptoms

Possible sumptoms of OBD code P0245 Jaguar
– Engine Light ON (or Service Engine Soon Warning Light)

Causes

Possible causes of OBD code P0245 Jaguar
– VPWR circuit open to SCB solenoid. – SCB solenoid circuit shorted to PWR GND or CHASS JaguarIS GND. – Damaged SCB solenoid. – SCB solenoid circuit open. – SCB solenoid circuit shorted to VPWR. – Damaged

Possible Solutions

Disconnect SCB solenoid. Connect test lamp to SCB solenoid harness connector. Cycle SCB driver in PCM by Output Test Mode. Test lamp cycle on and off – SCB solenoid is suspect. Test lamp always on – SCB signal short in harness or PCM. Test always off – SCB signal or VPWR open in harness or PCM.


The OBD2 Code Information Be Applicable For Jaguar:

2013 Jaguar XJ,2013 Jaguar XF,2013 Jaguar XFR,2012 Jaguar XKR,2012 Jaguar XJ,2012 Jaguar XFR,2012 Jaguar XF,2011 Jaguar XKR,2010 Jaguar XKR,2010 Jaguar XJ,2010 Jaguar XFR,2010 Jaguar XF,2009 Jaguar XF,2008 Jaguar XJ,2007 Jaguar XKR,2007 Jaguar XK,2006 Jaguar XJ,2003 Jaguar RD6 Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Jaguar makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.