Jaguar P0325 Sensor Circuit Malfunction

Description

OBD-II Trouble Code Description for P0325 Jaguar

Knock Sensor 1 Circuit

What does this mean?

OBD2 Code P0325 Jaguar definition:
A knock sensor tells the engine computer when one or more of your engine’s cylinders are “knocking”, that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged. The computer uses this information to tune the engine so that it doesn’t knock. If your knock sensor wasn’t operating properly, so that it was always indicating a knock, the engine computer’s response may have been to change the ignition timing on your engine. Knock sensors generally bolt into or thread into the engine block. This P0325 Jaguar code may show up intermittently or the Service Engine light may be lit constantly. Other knock sensor related DTC codes include P0330 Jaguar.

Symptoms

Possible sumptoms of OBD code P0325 Jaguar
You may notice drivability problems including a lack of power and perhaps some hesitation. There may also be other symptoms.

Causes

Possible causes of OBD code P0325 Jaguar
A code P0325 Jaguar most likely means one or more of the following has happened: The knock sensor is faulty and needs to be replaced There is a wiring short/fault in the knock sensor circuit

Possible Solutions

Check the resistance of the knock sensor (compare it to factory specs) Check for broken/frayed wires leading to the sensor Replace the knock sensor


The OBD2 Code Information Be Applicable For Jaguar:

2013 Jaguar XJ,2013 Jaguar XF,2013 Jaguar XFR,2012 Jaguar XKR,2012 Jaguar XJ,2012 Jaguar XFR,2012 Jaguar XF,2011 Jaguar XKR,2010 Jaguar XKR,2010 Jaguar XJ,2010 Jaguar XFR,2010 Jaguar XF,2009 Jaguar XF,2008 Jaguar XJ,2007 Jaguar XKR,2007 Jaguar XK,2006 Jaguar XJ,2003 Jaguar RD6 Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Jaguar makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.