Jaguar P0788 3-2 Shift Solenoid Control Circuit High Voltage

Description

OBD-II Trouble Code Description for P0788 Jaguar

Shift/Timing Solenoid High

What does this mean?

OBD2 Code P0788 Jaguar definition:
Shift solenoid valve ST is switched ON OFF by a signal from Engine Control Module (ECM) so that let in or out timing of 2nd brake is adjusted by operating orifice control valve. Therefore, shift solenoid valve ST operates when letting in or out reverse clutch.

Symptoms

Possible sumptoms of OBD code P0788 Jaguar
– Engine Light ON (or Service Engine Soon Warning Light)

Causes

Possible causes of OBD code P0788 Jaguar
– Low transmission fluid level – Dirty transmission fluid – Faulty shifting solenoid valve – Shifting solenoid valve harness or connectors – Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: Code P0788 Jaguar is detected when the Engine Control Module (ECM) ECM detects open in solenoid valve ST circuit 4 times when solenoid valve ST is not operated

Possible Solutions


The OBD2 Code Information Be Applicable For Jaguar:

2013 Jaguar XJ,2013 Jaguar XF,2013 Jaguar XFR,2012 Jaguar XKR,2012 Jaguar XJ,2012 Jaguar XFR,2012 Jaguar XF,2011 Jaguar XKR,2010 Jaguar XKR,2010 Jaguar XJ,2010 Jaguar XFR,2010 Jaguar XF,2009 Jaguar XF,2008 Jaguar XJ,2007 Jaguar XKR,2007 Jaguar XK,2006 Jaguar XJ,2003 Jaguar RD6 Concept

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Jaguar makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.