Description
OBD-II Trouble Code Description for P0161 Land Rover
O2 Sensor Heater Circuit
What does this mean?
OBD2 Code P0161 Land Rover definition:
It basically means the PCM detected either an excessive current draw, or an open or short in the circuit powering the oxygen sensor’s heater circuit. This is in reference to the Heated Oxygen Sensor (2) located rear of catalytic converter (Bank 2).
Symptoms
Possible sumptoms of OBD code P0161 Land Rover
There will likely be no obvious symptoms other than MIL illumination.
Causes
Possible causes of OBD code P0161 Land Rover
A code P0161 Land Rover may mean that one or more of the following has happened: HO2S heater power circuit open HO2S heater ground circuit open HO2S signal tracking (due to oil or moisture in the connector) HO2S is damaged or has failed PCM has failed
Possible Solutions
Replace HO2 Sensor Repair open or short in power circuit Repair open or short in ground circuit Repair damaged connector due to tracking
The OBD2 Code Information Be Applicable For Land Rover:
2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.