Land Rover P0176 Fuel Composition Sensor Circuit Malfunction

Description

OBD-II Trouble Code Description for P0176 Land Rover

Fuel Composition Sensor Circuit

What does this mean?

OBD2 Code P0176 Land Rover definition:
Fuel Composition Sensors are used to determine the amount of ethanol alcohol in the gasoline. Normally, a gasoline engine should not have more than 10% ethanol alcohol in the fuel for proper operation. Some vehicles have a flexi-fuel system on them that allow them to run on up to 85% ethanol alcohol in the fuel. The fuel composition sensor sends a frequency modulated signal to the engine controller which is proportional to the alcohol content of the fuel. The injector pulse width and the ignition timing are modified for the increased alcohol content. It takes almost twice the amount of alcohol compared to gasoline to produce the same power.

Symptoms

Possible sumptoms of OBD code P0176 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light)

Causes

Possible causes of OBD code P0176 Land Rover
– Open or short in FF sensor VPWR circuit – Open in battery ground to FF sensor circuit – Open in FF sensor signal circuit – Short to ground in FF sensor signal circuit – Fuel contamination – Short to VPWR in FF sensor batte

Possible Solutions


The OBD2 Code Information Be Applicable For Land Rover:

2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.