Land Rover P0329 Knock Sensor Circuit Intermittent

Description

OBD-II Trouble Code Description for P0329 Land Rover

Knock Sensor 1 Circuit Input Intermittent

What does this mean?

OBD2 Code P0329 Land Rover definition:
The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Powertrain Control Module (PCM) or Engine Control Module (ECM).

Symptoms

Possible sumptoms of OBD code P0329 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light) – Lack/Loss of Power

Causes

Possible causes of OBD code P0329 Land Rover
– Knock sensor circuit short to GND. – Knock sensor circuit short to PWR. – Knock sensor circuit open. – Damaged knock sensor. – Powertrain Control Module (PCM The Error code is generally activated on detection of the following conditions: – An intermittent voltage from the sensor is sent to Powertrain Control Module (PCM) or Engine Control Module (ECM)

Possible Solutions

– Repair or resecure harness or connector – Replaced knock sensor


The OBD2 Code Information Be Applicable For Land Rover:

2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.