OBD-II Trouble Code Description for P0510 Land Rover

Closed Throttle Position Switch

What does this mean?

OBD2 Code P0510 Land Rover definition:
A closed throttle position switch and wide open throttle position switch are built into the Throttle Position Sensor (TPS) unit. The wide open throttle position switch is used only for A/T control. When the throttle valve is in the closed position, the closed throttle position switch sends a voltage signal to the ECM. The ECM only uses this signal to open or close the EVAP canister purge volume control solenoid valve when the throttle position sensor is malfunctioning.

Symptoms

Possible sumptoms of OBD code P0510 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light) – Engine idle problems – Possible hard to start – Possible shifting problems

Causes

Possible causes of OBD code P0510 Land Rover
– The closed throttle position switch Harness or connectors is shorted – Closed throttle position switch – Throttle position sensor The Error code is generally activated on detection of the following conditions: Malfunction is detected when battery voltage from the closed throttle position switch is sent to ECM with the throttle valve opened.

Possible Solutions

Adjusting the Throttle Position Sensor (TPS) takes care of the problem.