Description
OBD-II Trouble Code Description for P0629 Land Rover
Fuel Pump “A” Control Circuit High
What does this mean?
OBD2 Code P0629 Land Rover definition:
When the ignition switch is turned on The ECM will mobilize the fuel pump relay and run the in-tank fuel pump as soon as the ignition is switched ON. The fuel pump will function till the engine cranks or runs, and the ECM continues to obtain ignition reference pulses.
Symptoms
Possible sumptoms of OBD code P0629 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0629 Land Rover
– Fuel pump relay circuit short to ground – Faulty fuel pump relay The Error code is generally activated on detection of the following conditions: The commanded signal to the fuel lift pump does not match the feedback signal
Possible Solutions
The OBD2 Code Information Be Applicable For Land Rover:
2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.