Description
OBD-II Trouble Code Description for P0728 Land Rover
Engine Speed Input Circuit Intermittent
What does this mean?
OBD2 Code P0728 Land Rover definition:
The Engine Control Module (ECM) monitors the engine speed through the Crankshaft Position (CKP) sensor with the engine running, and send signal to the Transmission Control Module (TCM).
Symptoms
Possible sumptoms of OBD code P0728 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light)
Causes
Possible causes of OBD code P0728 Land Rover
– Open or shorted CKP sensor circuit condition – Poor CKP sensor electrical connection – Check communication error between the ECM and TCM – Failed CKP Sensor The Error code is generally activated on detection of the following conditions: The P0728 Land Rover Codes is triggered when the TCM detected that the engine speed received from the ECM is intermittent.
Possible Solutions
The OBD2 Code Information Be Applicable For Land Rover:
2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.