Land Rover P0765 Shift Solenoid D Malfunction

Description

OBD-II Trouble Code Description for P0765 Land Rover

Shift Solenoid “D”

What does this mean?

OBD2 Code P0765 Land Rover definition:
Shift solenoid valve D is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

Symptoms

Possible sumptoms of OBD code P0765 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light) – Transmission will not shift gears.

Causes

Possible causes of OBD code P0765 Land Rover
– Low transmission fluid level – Dirty transmission fluid – Faulty shift solenoid D valve – Shift solenoid D valve harness or connectors – Shift solenoid D valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0765 Land Rover code is detected when the ECM detects an improper voltage drop when it tries to operate the solenoid valve.

Possible Solutions


The OBD2 Code Information Be Applicable For Land Rover:

2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.