Land Rover P0780 Shift Malfunction

Description

OBD-II Trouble Code Description for P0780 Land Rover

Shift Error

What does this mean?

OBD2 Code P0780 Land Rover definition:
The Transmission Control Module (TCM) monitors the transmission mechanical shifting through various sensors. This malfunction is detected when the A/T does not shift as instructed by the TCM. This is not caused by electrical malfunction (circuits open or shorted) but by mechanical malfunction such as control valve sticking,improper solenoid valve operation, etc.

Symptoms

Possible sumptoms of OBD code P0780 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light) – Transmission shift shock

Causes

Possible causes of OBD code P0780 Land Rover
– Low transmission fluid level – Dirty transmission fluid – Faulty shifting solenoid valve – Shifting solenoid valve harness or connectors – Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0780 Land Rover codes is detected when no rotation change occurs between input (turbine revolution sensor) and output (revolution sensor) and shifting time is long or when shifting ends immediately or when engine revs up unusually during shifting.

Possible Solutions


The OBD2 Code Information Be Applicable For Land Rover:

2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.