Land Rover P0788 3-2 Shift Solenoid Control Circuit High Voltage

Description

OBD-II Trouble Code Description for P0788 Land Rover

Shift/Timing Solenoid High

What does this mean?

OBD2 Code P0788 Land Rover definition:
Shift solenoid valve ST is switched ON OFF by a signal from Engine Control Module (ECM) so that let in or out timing of 2nd brake is adjusted by operating orifice control valve. Therefore, shift solenoid valve ST operates when letting in or out reverse clutch.

Symptoms

Possible sumptoms of OBD code P0788 Land Rover
– Engine Light ON (or Service Engine Soon Warning Light)

Causes

Possible causes of OBD code P0788 Land Rover
– Low transmission fluid level – Dirty transmission fluid – Faulty shifting solenoid valve – Shifting solenoid valve harness or connectors – Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: Code P0788 Land Rover is detected when the Engine Control Module (ECM) ECM detects open in solenoid valve ST circuit 4 times when solenoid valve ST is not operated

Possible Solutions


The OBD2 Code Information Be Applicable For Land Rover:

2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.