Land Rover P1184 DV-E Failure: Powerstagc

Description

Ferrari OBD-II Trouble Code Description for P1184 Land Rover

DV-E Failure: Powerstagc

Possible Solutions

Powerstagc switched-off (plaus) 1 reset DV-E adaptation Tame 2 lory off and on again, engine off 3 read leaning step counter. Hat to be 9 and bJrnfg-1, if no; -cbech throttle position: Low v?l?el.I-2.8%-*AccpedaH)% High value 99-102% *Aecpedal?100 ? check the wiring, potentiometer – key on, engine off, output signal; 0.65-0.85 – *Accp?ttaH>y. 3.7-3.9* Accpedat-100% ? battery voltage >9V – Tmet, TIM > 5*C – Accpedal < 14% ? Vehicle ipedd-OKm/h

OBD-II Trouble Code Description for P1184 Land Rover

EOT Sensor Out Of Range

OBD-II Trouble Code Description for P1184 Land Rover

O2s No Activity (B1/S2)

PSA OBD-II Trouble Code Description for P1184 Land Rover

Engine oil temperature Out of self test range

PSA OBD-II Trouble Code Description for P1184 Land Rover

Engine oil temperature Out of self test range


The OBD2 Code Information Be Applicable For Land Rover:

2013 Land Rover,2012 Land Rover,2011 Land Rover,2010 Land Rover,2009 Land Rover ,2008 Land Rover,2007 Land Rover,2006 Land Rover,2005 Land Rover,2004 Land Rover,2003 Land Rover,2002 Land Rover

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Land Rover makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.