Lincoln P0331 Knock Sensor 2 Circuit Range/Performance Bank 2

Description

OBD-II Trouble Code Description for P0331 Lincoln

Knock Sensor 2 Circuit Range/Performance

What does this mean?

OBD2 Code P0331 Lincoln definition:
The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Powertrain Control Module (PCM) or Engine Control Module (ECM).

Symptoms

Possible sumptoms of OBD code P0331 Lincoln
– Engine Light ON (or Service Engine Soon Warning Light) – Lack/Loss of Power

Causes

Possible causes of OBD code P0331 Lincoln
– Knock sensor circuit short to GND. – Knock sensor circuit short to PWR. – Knock sensor circuit open. – Damaged knock sensor. – Powertrain Control Module (PCM The Error code is generally activated on detection of the following conditions: – An excessively low or high voltage from the sensor is sent to Powertrain Control Module (PCM) or Electronic Control Module (ECM)

Possible Solutions

The OBD2 Code Information Be Applicable For Lincoln:

2013 Lincoln MKZ,2013 Lincoln MKT,2013 Lincoln MKS,2013 Lincoln MKC,2012 Lincoln MKZ,2011 Lincoln MKX,2010 Lincoln MKZ,2010 Lincoln MKT,2009 Lincoln MKS,2009 Lincoln C Concept,2008 Lincoln MKT Concept,2007 Lincoln Navigator,2007 Lincoln MKZ,2007 Lincoln MKX,2007 Lincoln MKR Concept,2006 Lincoln Zephyr,2006 Lincoln Mark LT,2006 Lincoln MKS Concept,2004 Lincoln Mark X Concept,2004 Lincoln Aviator Concept,2003 Lincoln Town Car,2003 Lincoln Aviator,2001 Lincoln MK9

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Lincoln makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.