Description
OBD-II Trouble Code Description for P0457 Mini
Evaporative Emission System Leak Detected (fuel cap loose/off)
What does this mean?
OBD2 Code P0457 Mini definition:
A fuel tank pressure change less than a minus (-) 7 inches of water in 30 seconds has occurred after refueling; or there is excessive purge (fuel vapor) flow greater than 0.06 pounds per minute.
Symptoms
Possible sumptoms of OBD code P0457 Mini
– Engine Light ON (or Service Engine Soon Warning Light) – Possible a noticeable fuel odor caused by the release of fuel vapors – Fuel cap indicator lamp (FCIL) may be illuminated.
Causes
Possible causes of OBD code P0457 Mini
– Damaged, missing or loosely installed fuel filler cap. The Error code is generally activated on detection of the following conditions: EVAP control system has a very large leak such as fuel filler cap fell off
Possible Solutions
Check for a loose, missing or damage fuel filler the cap.
The OBD2 Code Information Be Applicable For Mini:
2013 Mini Vision Concept,2013 Mini Roadster,2013 Mini Cooper,2013 Mini Countryman,2013 Mini Clubvan Camper,2013 Mini Clubvan,2013 Mini Clubman Bond Street,2012 Mini Rocketman Concept,2012 Mini Coupe,2012 Mini Clubvan Concept,2012 Mini Bayswater,2012 Mini Baker Street,2011 Mini WRC,2010 Mini Scooter,2009 Mini Cooper,2008 Mini One,2008 Mini Cooper,2008 Mini Clubman,2007 Mini Cooper,2006 Mini Concept,2005 Mini Cooper,2004 Mini XXL,2004 Mini Cooper,2002 Mini Cooper,2000 Mini Seven,2000 Mini Cooper
Note:
1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Mini makes.
2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.
3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.
4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.
5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.