Mini P0524 Engine Oil Pressure Sensor/Switch Circuit

Description

OBD-II Trouble Code Description for P0524 Mini

Engine Oil Pressure Too Low

What does this mean?

OBD2 Code P0524 Mini definition:
The PCM continuously monitors the engine oil pressure. The Oil Pressure Sensor/Switch sends a signal to the PCM when the engine is running.

Symptoms

Possible sumptoms of OBD code P0524 Mini
– Engine Light ON (or Service Engine Soon Warning Light) – Oil pressure warning light ON.

Causes

Possible causes of OBD code P0524 Mini
– Low oil level or motor mechanical fault – Open or short oil level sensor circuit condition – Poor oil level sensor electrical connection – Faulty oil pressure sensor The Error code is generally activated on detection of the following conditions: The P0524 Mini is detected when the circuit from oil pressure sensor to PCM is malfunction.

Possible Solutions

The most likely cause is a faulty oil pressure sensor/switch


The OBD2 Code Information Be Applicable For Mini:

2013 Mini Vision Concept,2013 Mini Roadster,2013 Mini Cooper,2013 Mini Countryman,2013 Mini Clubvan Camper,2013 Mini Clubvan,2013 Mini Clubman Bond Street,2012 Mini Rocketman Concept,2012 Mini Coupe,2012 Mini Clubvan Concept,2012 Mini Bayswater,2012 Mini Baker Street,2011 Mini WRC,2010 Mini Scooter,2009 Mini Cooper,2008 Mini One,2008 Mini Cooper,2008 Mini Clubman,2007 Mini Cooper,2006 Mini Concept,2005 Mini Cooper,2004 Mini XXL,2004 Mini Cooper,2002 Mini Cooper,2000 Mini Seven,2000 Mini Cooper

 

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Mini makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.