Opel P1163 Heated Oxygen Sensor 1 Lean Shift Monitoring Bank 2

Description

Possible causes

– Front Heated Oxygen Sensor Bank 2
– Front Heated oxygen sensor 1 heater
– Fuel pressure
– Injectors
– Intake air leaks

Tech description

If there are no intake air leaks, the most likely cause of the P1163 Opel code is the front O2 sensor bank 2.

When is the obd code mean?

The maximum and minimum voltage from the sensor are not reached to the specified voltages.

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)

P1163 Opel OBD Code Description

The heated oxygen sensor 1 is placed into the front tube. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the ECM. The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

P1163 Opel Information for specific makes

P1163 Opel ACURA< Opel/span>
P1163 Opel BUICK Opel
P1163 Opel CADIL OpelLAC
P1163 Opel CHEVR OpelOLET
P1163 Opel GMC
P1163 Opel HONDA
P1163 Opel INFINITI
P1163 Opel NISSAN

The OBD2 Code Information Be Applicable For Opel:

2013 Opel Astra OPC,2013 Opel Adam,2012 Opel Zafira Tourer,2012 Opel Combo,2012 Opel Astra GTC,2012 Opel Ampera,2011 Opel Zafira,2011 Opel Meriva,2011 Opel Corsa,2011 Opel Astra,2011 Opel Antara,2010 Opel Insignia,2010 Opel Corsa,2010 Opel Astra,2008 Opel Corsa,2007 Opel GT,2007 Opel Corsa,2007 Opel Astra,2007 Opel Antara,2006 Opel Vectra,2006 Opel Meriva,2006 Opel Astra,2005 Opel Astra,2004 Opel Astra,2003 Opel Signum,2003 Opel Meriva

Note:

1. The list of automotive Makes at the right edge of the screen. The currently selected ODB-ii codes is for the Opel makes.

2. Look up the other OBD II Trouble Codes, please use the search box. Enter the 5 character trouble codes in the search box and submit the search.

3. Don’t assume a particular OBD-II code means the same for other auto manufacturers as there are many makes specific codes in use.

4. If your OBD-II trouble codes are for a different car, select that vehicle series before searching for the diagnostic codes because not all OBD2 codes used by one manufacture are used by the other makes.

5. The information contained on this site is presented for informational purposes only. We are not responsible for any actions you take on your vehicle. If you have any doubt as to repairs on your vehicle, please contact your technician.