Possible causes
– Bank 1 Camshaft 2 Position Actuator harness is open or shorted
– Bank 1 Camshaft 2 Position Actuator circuit poor electrical connection
– Faulty Camshaft position solenoid
– Faulty Powertrain Control Module (PCM)
– Bank 1 Camshaft 2 Position Actuator circuit poor electrical connection
– Faulty Camshaft position solenoid
– Faulty Powertrain Control Module (PCM)
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
P0014 JEEP OBD Code Description
The actual camshaft phasing setpoint does not match the desired camshaft phasing setpoint