P0130 CHEVROLET HO2S circuit sensor 1

Possible causes
– Faulty Front Heated Oxygen Sensor Bank 1
– Front Heated Oxygen Sensor Bank 1 harness is open or shorted
– Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
– Inappropriate fuel pressure
– Faulty fuel injectors
– Intake air leaks may be faulty
– Exhaust gas leaks
Tech description
Replacing the O2 Sensor 1 usually takes care of the problem
When is the obd code mean?
The response of the voltage signal from the sensor takes more than the specified time.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– High Fuel Consumption
– Excessive Smoke from Exhaust
P0130 CHEVROLET OBD Code Description

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

CHEVROLET Related P0130 code
2002 CHEVROLET CAVALIER Electrical System
2002 CHEVROLET TRAILBLAZER Electrical System
2003 CHEVROLET TRAILBLAZER Electrical System
2004 CHEVROLET TRAILBLAZER Electrical System
2002 CHEVROLET MALIBU Power Train:automatic Transmission:control Module (tcm, Pcm)
2003 CHEVROLET MALIBU Power Train:automatic Transmission:control Module (tcm, Pcm)