P0132 FORD O2 Sensor Circuit High Voltage Bank 1 Sensor 1

Possible causes
– Faulty Front Heated Oxygen Sensor Bank 1
– Front Heated Oxygen Sensor Bank 1 harness is open or shorted
– Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
– Inappropriate fuel pressure
– Faulty fuel injectors
– Intake air leaks may be faulty
– Exhaust gas leaks
Tech description
Replacing the O2 Sensor 1 usually takes care of the problem
When is the obd code mean?
The heated oxygen sensor (HO2S) signals are monitored for an over voltage condition.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– High Fuel Consumption
– Excessive Smoke from Exhaust
P0132 FORD OBD Code Description

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

FORD Related P0132 code
1998 FORD FORD Fuel System, Gasoline:fuel Injection System
1999 FORD FORD Fuel System, Gasoline:fuel Injection System
2000 FORD FORD Fuel System, Gasoline:fuel Injection System
2001 FORD FORD Fuel System, Gasoline:fuel Injection System
2002 FORD FORD Fuel System, Gasoline:fuel Injection System
2003 FORD FORD Fuel System, Gasoline:fuel Injection System