P0330 HYUNDAI Knock Sensor 2 Circuit

Possible causes
– Faulty knock sensor
– Knock sensor circuit poor electrical connection
– Knock sensor harness is open or shorted
– Faulty Engine Control Module (ECM)
Tech description
The P0330 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem.
When is the obd code mean?
An excessively low or high voltage from the sensor is sent to Engine Control Module (ECM)
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Possible Lack/Loss of Power
P0330 HYUNDAI OBD Code Description

The Knock Sensor (KS) is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).