P0444 NISSAN EVAP Canister Purge Volume Control Solenoid Valve Circuit Open

Possible causes

– Faulty Evaporative Emission (EVAP) Purge Solenoid Control
– Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
– Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection

Tech description

There is a factory service bulletin for the following Nissan models:

2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2008-2010 Nissan Rogue Service Bulletin OBDII Code P0444

2002 Nissan Altima
2003 Nissan Altima
2004 Nissan Altima
2005 Nissan Altima
2002-2005 Nissan Altima Service Bulletin OBDII Code P0444

2006 Nissan Altima
2006 Nissan Altima Service Bulletin OBDII Code P0444

When is the obd code mean?

An excessively low voltage signal is sent to ECM through the valve

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)

P0444 NISSAN OBD Code Description

This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.

The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.

NISSAN Related P0444 code