Possible causes
– Engine Control Module (ECM) may be faulty
– ECM harness power supply circuit is open or shorted
– ECM harness ground circuit is open or shorted
– ECM harness power supply circuit is open or shorted
– ECM harness ground circuit is open or shorted
Tech description
Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.
When is the obd code mean?
Indicates the ECM has experienced an internal memory fault.
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Engine may not start
– Engine may not start
P0605 VOLKSWAGEN OBD Code Description
The Engine Control Module (ECM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check insures that the ECM is functioning properly. If any malfunction is detected, the ECM sets the P0605 code and illuminates the MIL.
