Possible causes
– Low transmission fluid level
– Dirty transmission fluid
– Faulty shift solenoid ‘B’ valve
– Shift solenoid ‘B’ valve harness or connectors
– Shift solenoid ‘B’ valve circuit is open or shorted
– Dirty transmission fluid
– Faulty shift solenoid ‘B’ valve
– Shift solenoid ‘B’ valve harness or connectors
– Shift solenoid ‘B’ valve circuit is open or shorted
When is the obd code mean?
ECM detected a failure in shift solenoid B Circuit (2-3 shift)
Symptoms
– Engine Light ON (or Service Engine Soon Warning Light)
– Transmission will not shift gears.
– Transmission will not shift gears.
P0756 JEEP OBD Code Description
Shift solenoid valve B is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.