P0757 DODGE 2-3 Shift Solenoid Fault

Possible causes

– Low transmission fluid level
– Dirty transmission fluid
– Faulty 2-3 Shift Solenoid Valve
– 2-3 Shift Solenoid Valve harness or connectors
– 2-3 Shift Solenoid Valve circuit is open or shorted

When is the obd code mean?

The P0757 code is detected when the TCM has detected voltage on the 2-3 shift solenoid during a period when the solenoid is not active

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)
– Transmission will not shift gears

P0757 DODGE OBD Code Description

2-3 shift solenoid valve is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.