P0760 FORD Shift Solenoid 3 Circuit

Possible causes

– Low transmission fluid level
– Dirty transmission fluid
– Faulty 3 Shift Solenoid Valve
– 3 Shift Solenoid Valve harness or connectors
– 3 Shift Solenoid Valve circuit is open or shorted

When is the obd code mean?

The P0760 code is detected when the ECM energized solenoid and detected an open or shorted condition

Symptoms

– Engine Light ON (or Service Engine Soon Warning Light)
– Transmission will not shift gears

P0760 FORD OBD Code Description

Shift solenoid valve 3 is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.

FORD Related P0760 code